2N IP Verso, Руководство по установке

Страница: 204 / 241

Installation manual 2N® IP Verso
204 / 241
•
•
Blind Panel
The Blind panel ( Part No. 9155039 ) is used to cover an empty position.
Security Relay
The 2N
®
Security Relay (Part No. 9159010) is used for enhancing security between the intercom
and the connected electric lock. The 2N
®
Security Relay is designed for any 2N IP intercom
model with firmware versions 1.15 and higher. It significantly enhances security of the
connected electric lock as it prevents lock opening by forced intercom tampering.
Function:
The 2N
®
Security Relay is a device installed between an intercom (outside the secured area)
and the electric lock (inside the secured area). The 2N
®
Security Relay includes a relay that can
only be activated if the valid opening code is received from the intercom.
Specifications:
Passive switch: NO and NC contacts, up to 30 V / 1 A AC/DC
Switched output:
Where the security relay is fed from the intercom, 9 to 13 V DC is available on the output
depending on the power supply (PoE: 9 V; adapter: source voltage of minus 1 V) / 400 mA
DC.
Where the security relay is fed from an external power supply, 12 V / 700 mA DC is available
on the output.
Dimensions: (56 x 31 x 24) mm
Weight: 20 g
Installation:
Install the 2N
®
Security Relay onto a two-wire cable between the intercom and the electric lock
inside the area to be secured (typically behind the door). The device is powered and controlled