2N IP Force 9151101CHKW, Руководство по установке

Страница: 101 / 118

Installation manual 2N® IP Force
101 / 118
•
•
•
•
•
•
•
•
•
•
•
•
3. Function and Use
In this section we describe the basic and extending functions of the 2N
®
IP
Force product.
Here is what you can find in this section:
3.1 Configuration
3.2 Control
3.3 Maintenance
3.4 Downloads
3.1 Configuration
Use a PC equipped with any web browser to configure 2N
®
IP Force :
Launch your web browser (Internet Explorer, Firefox, etc.).
Enter the IP address of your intercom (
http://192.168.1.100/ , e.g.).
Log in using the Admin user name and 2n password.
You have to know the IP address of your device to log in to the integrated
web server. By
default, 2N
®
IP Force is switched into the dynamic IP address
mode, i.e. it obtains the IP address automatically if a properly set DHCP
server is available in your LAN. If no such DHCP server is available, you can
operate 2N
®
IP Force in the static IP address mode.
If your device remains inaccessible (you have forgotten the IP address, or the
LAN configuration has changed, for example), change the LAN settings using
the buttons on the device.
IP Address Retrieval
Take the following steps to retrieve the 2N
®
IP Force IP address:
Connect (or, if connected, disconnect and reconnect) 2N
®
IP Force to the power supply.
Wait for the second sound signal .
Press the first quick dial button 5 times.
2N
®
IP Force will read its IP address.
If the address is 0.0.0.0, it means that the intercom has not obtained the IP address from the DHCP server.