2N Helios, Руководство пользователя и обслуживания

Страница: 38 / 43

38
Evaluation of Situations in Speakerphone Automatic Dialling without Confirmation
Situation Helios Action
Busy tone
Hangs up in approximately 2 seconds and dials the
next number.
Call or silence without previous
ringing tone
Waits for the preset timeout (log-in time), then hangs
up and dials the next number.
Continuous tone (at the PBX, e.g.)
Hangs up in approximately 2 seconds and dials the
next number.
Ringing tone, which is terminated
before 10 rings are made (the count
of rings is variable) Regarded as a successful call, continues for the
maximum timeout (maximum call duration).
For details refer to the text under the table.
Ringing tone, 10 rings are made (the
count of rings is variable)
Hangs up and dials the next number.
to ,
These digits are interpreted as password beginning.
Call extension or password beginning.
Hang-up command.
If the ringing tone stops before the predefined count of rings is achieved and the call is thus very
short (e.g. 2 seconds), it is not clear whether the call should be regarded as successful.
Therefore, a new type of automatic dialling has been added - type 4. The difference is as
follows:
•
Type 3 regards such a call as successful only if the door is opened.
•
Type 4 regards all such calls as successful
.
Automatic Multiple Number Dialling with Confirmation
This mode is used where maximum connection reliability is required – for
emergency calls. The called line (the supervisory control centre, e.g.) must be operated
by a well-trained person to confirm connection. The DTMF is used as the most reliable
criteria for successful connection. The called line must press on its telephone. If the
called number is busy or remains unanswered until the preset timeout or in other cases
(see the table),
Helios
dials the next number in the sequence.
Evaluation of Situations in Speakerphone Automatic Dialling with Confirmation
Situation Helios Action
Busy tone
Hangs up in approximately 2 seconds and dials the
next number.
Call or silence
Waits for the preset timeout (log-in time), then
hangs up and dials the next number.
Ringing tone
Waits for the preset count of rings, then hangs up
and dials the next number.
Continuous tone (at the PBX,
e.g.) Hangs up in approximately 2 seconds and dials the
next number.
DTMF char or
Immediately hangs up and dials the next number.
DTMF char
Confirms reception (2 beeps) and the call continue
for the preset time at most (maximum call duration).
These digits are interpreted as control characters -
refer to the DTMF Control subsection.