Installation manual 2N® IP Audio Kit
25
/
57
•
•
•
•
•
•
•
•
2. Description and Installation
Here is what you can find in this section:
2.1 Before You Start
2.2 Mechanical Installation
2.3 Electric Installation
2.4 Extending Module Connection
2.5 Configuration
2.6 Downloads
2.1 Before You Start
Product Completeness Check
Before installing this product, please check whether
the
2N
®
IP
Audio Kit
delivery complies with
the following packing list.
1x
2N
®
IP Audio Kit
1x Short Installation Manual
2.2 Mechanical Installation
Mounting Types
Refer to the table below for a list of mounting types and necessary components. Make sure that
the installation site is not exposed to flowing or condensed water.
Wall mounting
Use the proper wall mounting screws and dowels (not included in the delivery). Hang the device
on the wall using the cover bottom holes.
•
Caution
Before starting the mechanical installation on a selected place, make sure
carefully that the preparations connected with it (drilling, wall cutting) cannot
damage the electrical, gas, water and other existing wires and pipes.