Installation manual 2N® IP Audio Kit
41
/
57
•
•
•
•
•
•
Factory Reset
Follow the instructions below
to
reset the factory default values
:
Press and hold the RESET button.
Wait until the red and green LEDs go on simultaneously and the acoustic signal
can be
heard (approx. 15–35 s).
Wait until the red LED goes off and the acoustic signal
can be heard (approx. for
another 3 s).
Wait until the green LED goes off and the red LED goes on again and the acoustic signal
can be heard (approx. for another 3 s).
Wait until the red LED goes off and the acoustic signal
can be heard (approx. for
another 3 s).
Release the RESET button.
