Mounting
Remove the connectors on the ALARM inversion and programming jumpers on
2N
®
. Use the 4 screws to loosen and move downwards the audio
Lift1/ 2N SingleTalk
®
unit. Disconnect the speaker and (external) microphone.
Connect the cable connectors included in the delivery to the microphone and speaker
connectors on
(the microphone and speaker connectors
2N Lift1
®
/ 2N SingleTalk
®
have different sizes and cannot be interchanged due to the audio unit cover
pictograms). Replace the audio unit cover, move it upwards and tighten the 4 screws.
Put the 6-pin connector on the ALARM inversion and programming jumpers (see the
figure below).
