11
Display languages available:
Alarm settings:
In order to change the alarm settings, press and hold the “ALARM” button. After a moment the display
will show a flashing alarm hour number. Use the “UP” and “DOWN” buttons to set the appropriate value.
Then use the “ALARM” button to move to setting minutes.
In order to activate/deactivate the alarm clock function, push the “ALARM” button once in the normal
display mode. The current functions status is shown in the form of a bell icon appearing on the display.
In order to view the alarm time set, use the “MODE” button.
Snooze function:
After the alarm is activated, push the “SNOOZE/LIGHT” button. This will silence the alarm and set its
repeated activation to 5 minutes later. The
current function status is shown in the form of the “Zz” icon
appearing on the display.
Temperature alert for the wireless sensor (outdoor temperature):
In order to change the temperature alert settings, press and hold the “ALERT” button. After a moment
t
he display will show a flashing number representing the upper alert temperature limit (Hi). Use the “UP”
and “DOWN” buttons to set the appropriate value. Next, use the “ALERT” button to move to the lower
alert temperature limit (Lo) settings.
In order to
activate/deactivate the alarm clock function, push the “ALERT” button once in the normal
display mode. The current function status is shown in the form of the Outdoor Temp Alerts bell icon
appearing on the display.
Weather forecast and atmospheric pressure:
In order to check the 12-hour history of atmospheric pressure measurements taken by the station, press
the “UP” button.
The pictogram representing the weather conditions changes depending on changes in atmospheric
pressure (the weather forecast shown by the station is obviously less accurate than the forecasts
prepared by professional weather forecast services).
Note! The pressure measurements and weather forecast provided by a station located in an air-
conditioned room may be distorted.
