2mag MIXdrive 1 XS, Руководство по эксплуатации

Страница: 11 / 48

© 2mag AG Page 11 of 44 Version: 5.1
3.2
Installation, connection to the control unit MIXcontrol eco
Step by step instruction (please also see image 3 and 4)

Switch off the control unit MIXcontrol eco BEFORE you
handle the connection cables by disconnection of the
power supply unit (1) and the low-voltage power cable
(2)!

The stirrer control cable (8) of the magnetic stirrer MIXdrive has
now to be connected to the 4-pin socket of the control unit (7).
Please secure this plug connection by turning the screw
nut situated at the plug.
Only by this a trouble-free operation
can be guaranteed.

Take the low-voltage power cable (2) of the power supply unit
(1) and connect the plug (3) to the power input socket (4) of the
control unit (5).

Connect the power supply unit (1) with power socket

The control unit is now connected to the magnetic stirrer and
ready for operation.
Image 3: Installation, magnetic stirrer MIXdrive with control unit MIXcontrol eco
9
4
10
3
2
1
7
8
5
9
4
10
3
2
1
7
8
5