© 2mag AG
Page 9 of 17
Version: 5.1
3.2
Installation, connection to the magnetic stirrer
Step by step instruction (please also see image 3)
Take the smaller wire (2) of the power supply unit (1) and
connect the round plug (3) with the socket (4) at the backside of
the magnetic stirrer (7).
Connect the power cable (5) to the power supply unit (1) and
afterwards to the power plug.
The magnetic stirrer is now connected to the power supply unit
and ready for operation.
Image 3:
Installation, rear side of the magnetic stirrer MIX 1
Description functional elements of control unit - backside
1
Power supply unit (100-240 volts)
2
Low voltage cable between power supply unit and magnetic stirrer
3
Low voltage plug
4
Low voltage socket at magnetic stirrer
5
Power cord
7
Magnetic stirrer
3
5
1
2
4
7
