Pic 4.37 PTZ configure
【
Channel
】
Choose the dome camera input channel.
【
Protocol
】
Choose the corresponding dome protocol. (PELCOD as an example)
【
Address
】
Set as the corresponding dome address. Default: 1.
(
Note
:
The address must be
consistent with the dome address.
)
【
Baudrate
】
Choose the corresponding dome baud rate length. You can control the PTZ and vidicion.
Default: 115200.
【
Data bits
】
Include 5-8 options. Default: 8.
【
Stop bits
】
Include 2 options. Default: 1.
【
Parity
】
Include odd check, even check, sign check, blank check. Default: void.
*When
*When
*When
*When under
under
under
under full
full
full
full digital
digital
digital
digital mode,
mode,
mode,
mode, it
it
it
it will
will
will
will show
show
show
show RS485
RS485
RS485
RS485 device.
device.
device.
device.