Basic Operation
HD TVI Hybrid DVR User Manual
10
Entering password by remote controller
If you want to enter “123456” by IR remote controller, you shall follow the following steps.
①
Move the cursor to password box and then press “Enter” button on the remote controller
to pop up a little soft keyboard.
②
Move the cursor to “1” on the little soft keyboard and then press “Enter” button on the
remote controller. Next, input “2”, “3”, “4”, “5”, “6” separately like that.
③
Move the cursor to “Enter” button on the little soft keyboard and then press “Enter”
button on the remote controller.
Controlling Multiple Devices by remote controller
The default device ID of the HD TVI Hybrid DVR is 0. It’s not necessary to reset the device
ID when a remote is to be used to control a single device. However when controlling multiple
devices with multiple remote controllers, you would need to configure the device ID, please
refer to below steps:
①
Activate remote controller to control the device: Turn the IR sensor of the remote
controller towards the IR receiver on the front panel, press the number key 8 twice on the
Button
Function
REC
Record manually
Search
To enter search mode
MEUN
To enter menu
Exit
To exit the current interface
ENTER
To confirm the choice or setup
Direction button
To move cursor in setup
ZOOM
To zoom in
PIP
To set picture in picture
To control playback. Play/ Pause/ Stop/ Previous
Section/Next Section/Backward/ Forward
Multi
To choose multi screen display mode
Next
To switch between single picture and picture group
SEQ
To go to auto dwell mode
INFO
Get information about the device like firmware version,
HDD information
