1.2
Connect the Power supply and turn on machine
1.3
Red Photon Therapy
1.3.1
Don’t take off the cover , keep a distance about 15-20cm between the light
treatment and the skin surface
1.3.2
Default working time 20 minutes
1.3.3
Change the treatment area 10 minutes /area one by one unit finish treatment area
needed
1.4
Ion Therapy
1.4.1
Apply a thin layer of water liquid product such as water liquid essence on the
treatment area This step is only necessary for a deep, intense treatment;
therefore it only needs to be done once a week. Wipe off any excess essence
with a paper towel.
1.4.2
Take off the cover ,chose the ion intensity button, adjust the ion level from low to
high depend on different skin condition and feeling until find out the best
comfortable level
1.4.3
Move the device in different directions on the skin, all skills should be sufficient
enough to ensure desired results and stimulate collagen formation in the
skin.(Warm notice,there will be somewhat electric shocking on skin, it is normal)
Refer to the gesture below
1.4.4 Cleansing after treatment is an important step.
Wash the area with cold water, and dry gently with a clean washcloth. Apply a quality mois
turizer or lotion, preferably with vitamins C and E for best results. Please don’t keep the
treatment area in the sunshine directly
IV Recommendation Treatment Process
Led photon therapy one time/week 10-15 minutes/area
Ion Skin lifting one treatment /5-10 days 15-20 minutes/area
Содержание SR-WD084
Страница 2: ...II Main Accessories ...
Страница 6: ......
