2GOability Zoom 4, Руководство пользователя

Страница: 33 / 37

32
Zoom 4
4 Beeps

Indicates that the motor control board is overloaded and overheated;

An overload can occur if you have been driving your scooter for an extended
period of time up an incline that is steeper than the recommended grade;

An overload can occur if your scooter is carrying a payload that is higher then the
recommended weight capacity;

If your scooter is equipped with pneumatic tires and they are underinflated, an
overload can also occur. Underinflated tires cause the motor to draw large
amounts of current. This high draw overheats the motor control board;

Your scooter will not operate until the motor control board cools back to its
operational temperature range.
Remedy:

Turn off your scooter key switch and allow the scooter to sit for 10 minutes;

Check the tire pressure;

Have your authorized 2GO ability dealer perform a battery load test.
5 Beeps

Indicates a brake problem;

The freewheel lever may be in the disengaged position;

The brake or the brake wiring may be damaged;

For safety reason, your scooter was designed to cease operation until the
problem is corrected.
Remedy:

Make certain that the freewheel lever is in the engaged position;

Turn the key switch to the "Off" position to stop the beep code;

Set the freewheel lever to the “engaged” position;

Turn the key back to the "On" position;

If the above remedies do not solve the problem, contact your authorized
2GO ability dealer.
6 Beeps

Indicates that the throttle control lever was not in the neutral position when the
key switch was turned to the “On” position.

May indicate that the throttle control lever is out of adjustment.
Remedy:

Turn the key switch to the "Off position";

Make certain that the throttle control lever is in the neutral position;

Turn the key switch to the "On" position;

If the above procedure does not solve the problem, contact your authorized
2GO ability dealer.