2GOability Boost, Руководство пользователя

Страница: 26 / 30

25
Because your batteries may only have a partial charge when you first receive your
scooter, you may not experience full riding time until you have fully charged them.
Your scooter is equipped with either an off-board charger. To ensure maximum life
charge your batteries as described below:

Turn off the power of the scooter;

Slide away the cover of the battery receiver socket and insert the battery charger
socket;

Do not switch on the battery charger until all the plugs are in position;

The led light of the battery will be amber while charging;

The led light will turn green when the batteries are fully charged;

If you are not going to use the scooter for more than a week, fully charge the
batteries and then disconnect them from the scooter.
8 PROBLEM ANALYSIS AND SOLUTIONS
Your 2GO ability Boost scooter is inspected and adjusted so that you can use it
immediately.
Number of flashes Meaning
1 Battery needs recharging
2 Battery voltage is too low
3 Battery voltage is too high
4 Current limit time out
5 Brake fault
6 Not in neutral at power up
7 Speed pot error
8 Motor volts error
9 Other internal error
10 Controller over heat
Picture 19