2gig Technologies Vario, Руководство по установке

Страница: 3 / 6

Nortek Security & Control | 1950 Camino Vida Roble, Suite 150 | Carlsbad, CA 92008-6517 | USA | 800-421-1587 | www.nortekcontrol.com
Copyright © 2016 Nortek Security & Control LLC.
3
Connectors
A
UX
C
O
M
L
ED
TM
P
VOICE
VOICE PLUG4
2GIG Vario Panel Voice Module
The Voice Module board contains the following connectors:
BUS (plug 1): Used to connect the Voice Module to the panel via the 4-wire BUS. The AUX (RED), COM (BLK), BUS (YEL), and BUS (GRN) terminals
are identical to the BUS connector and can be used for the same purpose.
VOICE (plug 2): Used to connect the Voice Module to the VOICE connector on the 2GIG Vario System main panel wia the supplied cable. This connector
transmits signals from the Voice Module to the telephone line during remote communication, and is essential for normal operation of the Voice Module.
Technical Specifications
Operating Voltage 13.8 VDC ± 10%
Current Draw 30 mA typical/70 mA maximum
Operating Temperature 0° C–70° C
Main Panel Connection Wire BUS, ≤ 300 m from main panel
User Operating
Telephone Control Commands
The 2GIG Vario System enables you to operate the system from a remote touch-tone phone. by initiating a telephone call to or from the system. Interacting with
voice menus, you can remotely operate the system.
Receiving a Call
1. Pick up the phone.
2. Say "Hello" or press # . You will hear an event announcement message.
3. Choose an option from the Acknowledgment menu.
Acknowledgment Menu
When a system event occurs (such as an alarm activation) the Voice Module notifies a system user by calling a specified telephone and playing a pre-recorded
announcement. After the event message, the system announces the following options:
Operation Title Description Action (remotely by telephone)
Acknowledgment Message
Confirms that you have received a message. The then system calls the next
Follow-Me number.
Press 1 .
Acknowledge and Stop All Dialing
This option acknowledges the event and stops the system from calling the
other Follow-Me numbers to report the event. Press 2 and then enter the
appropriate code.
Acknowledge and Access the Operations
Menu The Operations menu lists the available options for remotely operating your
system. Press 3 and then enter the
appropriate code.
Listen In and Talk This option enables you to perform bi-directional communication.
Press 6 , press 3 , and then enter the
appropriate code.
Repeat the Event Message Press # .
Repeat the Acknowledge Menu Press * .
Acknowledgment Menu
2GIG® Vario System
2GIG Vario Voice Module
10012671 A