2gig Technologies ADC-IS-300-LP Скачать руководство пользователя страница 9

Страница: 9 / 13

3. Determine location to mount the sensor.

4. Choose applicable mounting bracket. The sensor hardware packet contains two mounting brackets for different

mounting scenarios. Use the provided large screws and anchors to attach the bracket to the wall. (Leave at least
3 inches of clearance above the sensor to allow for battery replacement without uninstalling the mounting
bracket.)

5. Place sensor with arm on mounting bracket. Adjust the horizontal positioning of the sensor to point towards the

desired coverage area.

6. Secure the mounting arm location by sliding lock pin into the hole. Use the washer and remaining small screw to

secure the lock pin by screwing upwards through the bottom of the hole in the mounting bracket.

https://answers.alarm.com/ADC/Partner/Installation_and_Troubleshooting/Image_Sensor/Image_Sensor_Version_3/Alarm.com_Image_Sensor_(ADC-IS-300-LP)/2GIG_GC3e_Image_Sensor_Installation_Guide_-_ADC-IS-300-LP

Updated: Wed, 19 Jun 2019 01:34:38 GMT

Содержание ADC-IS-300-LP














Результаты поиска

Содержание ADC-IS-300-LP

Отзывы:

Похожие инструкции для ADC-IS-300-LP

Бренды по названию

Популярные бренды

2gig Technologies ADC-IS-300-LP, Руководство по установке

Результаты поиска

Содержание ADC-IS-300-LP

Отзывы:

Похожие инструкции для ADC-IS-300-LP

Бренды по названию

Популярные бренды