2GIG
®
EDGE Security & Smart Home System
2GIG-EDG-RK | EDGE Remote Keypad
Proprietary & Confidential
Copyright © 2021 Nortek Security & Control LLC
10030219 Rev-B
After power up, the EDGE Remote
Keypad will display a message on the
screen. Press
NEXT
to continue.
If not connected already, connect your
EDGE Panel and EDGE Remote Keypad
to the same Wireless Network.
After the Keypad has connected to
the chosen WiFi network, you’ll be
prompted to press PAIR on the Main
Panel.
NOTE:
When an 2GIG Edge Remote
Keypad is available to pair on the
network, the main panel will receive a
notification message.
On the primary panel, navigate to the
Installer Toolbox (See the
2GIG EDGE
Security & Smart Home Installation &
Programming Guide
).
1.
Tap
Panel Programming
(
).
2.
Tap
Keypads
(
).
3.
Tap an available Keypad#, then
tap the adjacent
Keypad Used
setting (or EDIT KEYPAD).
4.
Tap
Enabled
.
5.
Tap
Device ID
.
6.
Tap
PAIR KEYPAD
. The device
will search (listen) for a Keypad
7.
If desired, select
Voice
Descriptor
to assign a voice
descriptor.
8.
Tap
EDIT VOICE DESCRIPTOR
.
9.
Type the name of the desired
descriptor to search, then
choose from the list of available
words.
10.
Select
DONE
.
11.
Press the back button (
)
repeatedly to return to the Home
Screen.
The panels are now paired, both
displaying the Home Screen.
Pair the EDGE Remote Keypad
After mounting and powering the EDGE Remote Keypad, it will need to be setup and paired
with the EDGE Control Panel. The EDGE Remote Keypad pairs through a network connection to
the Control Panel. The network connection can be through Access Point capability directly to
the EDGE Control Panel, or through a local wireless Wi-Fi network.
NOTE:
Up to eight (8) EDGE Remote Keypads can be paired with an EDGE Control Panel.
Follow these steps and refer to “
Programming Sensors & Peripherals
” in the
2GIG EDGE
Security & Automation System Installation & Programming Guide
:
Limited Warranty
This Nortek Security & Control LLC product is warranted against defects in material and workmanship for one (1) year.
This
warranty extends only to wholesale customers
who buy direct from Nortek or through Nortek’s normal distribution channels.
Nortek Security & Control LLC does not warrant this product to consumers.
Consumers should inquire from their selling
dealer as to the nature of the dealer’s warranty, if any.
There are no obligations or liabilities on the part of Nortek Security & Control LLC for consequential damages arising out of or
in connection with use or performance of this product or other indirect damages with respect to loss of property, revenue, or
profit, or cost of removal, installation, or re-installation. All implied warranties, including implied warranties for merchantability
and implied warranties for fitness, are valid only until the warranty expires. This Nortek Security & Control LLC Warranty is in
lieu of all other warranties express or implied.
All products returned for warranty service require a Return Authorization Number (RA#).
Contact Returns at 1-855-546-3351 for an RA# and other important details.
Technical Support
Should you require support services for this system, contact 2GIG Technical Support at Nortek Security &
Control.
For support in the USA and Canada, contact 2GIG Technical Support at Nortek Security & Control:
➣
Phone:
800-421-1587
➣
Online:
www.nortekcontrol.com/support/
➣
Dealer Site:
For support outside of the USA or Canada, contact your regional 2GIG distributor. For a list of
distributors in your region, visit the websites above.
Please refer to the 2GIG-EDG-NA User guide and Installation guide for installation instructions according to
ANSI SIA CP-01
: 2010, UL 985, and UL 1023
Installation Guide
: 10025596 Rev-A
User Guide
: 10029908 Rev-A
Operating Temperature
For optimal use, operation temperature is 0°C to 49°C (32°F to 120°F).
Typical range
: 100 Ft.
