2 EASY
-5-
LED Buzzer
LED Buzzer
LED Buzzer
Press the [ADD Management
Fingerprint] In the standby mode;
It will enter the state of add user
fingerprints setting
.
1.Press finger in the fingerprint
window,the "beep,beep" prompt tone
indicates that the input is successful.
2.Repeat the above operation for 3-7
times
Successfully set as user fingerprint.
Note:Before add the fingerprint, press the
call button or KP keyboard to specify the
room number. If not, it is classified as public
room number;
(blue,flash)
(blue,flash)
(blue)
(1 seconds)
(beep,beep)
(beep)
Note:
1) After input, press ADD Management fingerprint will return to standby mode, or exit after 10s timeout;
2) The user fingerprint can not be duplicated , and cannot be managerment fingerprint;.
FP MODULE
2.1 Add User Fingerprints
