2E GART, Руководство пользователя, Страница: 11 / 54

11 EN
4) Powering AC appliances
1. Before using the AC output port, make sure that the power of your device is less than the
output power of the port.
2. Connect the device’s power plug to the portable power station’s AC port.
3. Click the AC button to enable output of the AC ports. Click the AC button again to disable
the AC port.
4. If the AC power is on and the AC output port is free of any load, the output will
automatically turn off after 8 hours and the station will automatically power off.
5. When the AC output is not in use, turn it off to avoid battery loss due to inverter power
consumption.
6. Hertz conversion: When AC is on, press the AC switch for 3 seconds to switch to
50Hz/60Hz.
Warning.
Different countries have different interface specifications and voltage standards.
Before use, be sure to carefully check whether the output characteristics of the product
match the input characteristics of the electrical appliance, otherwise it may cause damage to
the device.
5) Charging the product
Cold Weather
Cold weather can influence battery capacity. In sub-zero temperature (<0°C), you may be
able to discharge the product, but you should not charge it. Otherwise, the battery of the
product would be greatly damaged and the capacity may not even be recovered.
Attention: The operating environment should meet all requirements in this manual. Make
sure that the air inlet/outlet is not blocked.