2E DIYA, Руководство пользователя

Страница: 8 / 36

How to use the Power Station
1. Charging USB digital devices
(1) Connect the charging cable to the USB-A or TYPE-C output port.
(2) Connect the other end of the cable to the digital device.
(3) Press the USB power button to turn on the USB outputs. The device will automatically
detect and charge the electronics. The corresponding indicators will light up during charging.
(4) After charging is complete, turn off the USB outputs by pressing the button again.
2. Powering by 12V DC output port/cigarette lighter
1) Connect the device’s power cable to the DC output port of the energy storage system.
(2) Press the power button of the DC port.
(3) After use, disconnect the electrical device and cable from the DC port of the energy
storage system.
Attention
The DC output rated power of this station is less than 120W.
3. Powering by AC output port
(1) Select the appropriate plug, and then connect the equipment to the AC output port.
(2) Press the corresponding power button to turn on the AC output.
(3) After use, disconnect the electrical device and cable from the AC outlet of the energy
storage system.