2E C3220B, Руководство пользователя

Страница: 5 / 35

– 5 –
EN
Instruction of Base Installation
1. Remove the small cover on the rear shell, as shown in Fig. 1
2. Install the base support at the position shown in Fig. 2
3. Fix the base support on the machine with four Ø4x9 screws, as shown in Fig. 3
4. Install the small cover on the whole machine through the support, as shown in Fig. 4
5. Install the base on the support, and fix the base on the support with M6x14mm combination screw
with shrapnel, as shown in Fig. 5 and Fig. 6
Instruction of Base Installation
1.
Remove the small cover on the rear shell, as shown in Fig. 1
2. Install the base support at the position shown in Fig. 2
3. Fix the base support on the machine with four Ø4x9 screws, as shown in Fig. 3
4. Install the small cover on the whole machine through the support, as shown in Fig. 4
5. Install the base on the support, and fix the base on the support with M6x14mm combination screw
with shrapnel, as shown in Fig. 5 and Fig. 6
Fig. 1 Fig. 2
Ø4x9 screws
Fig. 3 Fig. 4
M6x14mm combination screws
Fig. 5 Fig. 6
Note: Some of the contents in this manual may differ slightly from the final product, and the later shall be
referred to.
Note: Some of the contents in this manual may differ slightly from the final product, and the later shall
be referred to.