Page 4 | Instruction Manual 622031 | 2E mechatronic
Page 5 | Instruction Manual 622031 | 2E mechatronic
This is a Protection Class IP67 device.
Installation/Assembly
The Sensor can be mounted on the target unit in 2 ways, both perpen-
dicular and parallel to the axis rotation.
Variation 1 (Perpendicular to axis): First, ensure that the surface is clean.
Then, mount the Sensor using 2 flat head screws (max. Ø4.5mm thread
diameter) to the target unit.
Variation 2 (Parallel to axis) mount the Sensor using 2 head shoulder
screws (fitting an inner diameter of Ø5H7).
Technical Data
Axis
1
Positive sense of rotation
Clockwise
Measurement range (angle)
360°
Max. resolution
± 0,01°
Dimensions
79 mm x 28 mm x 21 mm
Operating voltage
9V....32V
Measurement rate
< 180 ms
Protection class
IP67
Temperature range
-40°C – +85°C
Weight
80g (with cable/connector)
Accuracy
+10 – +40°C: <±0,1°
- 40 – +10°C: <±0,15°
+40 – +85°C: <±0,15°
Housing
Aluminium, 2 fixings
Interface
Modbus RTU (RS485)
approved in the operation manual and are made without permission could
void the warranty and manufacturer’s liability. Should a severe disturbance
occur, the device should be taken out of operation immediately and pro-
tected against accidental reuse. If such an occurrence should happen the
device should be sent to 2E mechatronic for repair.
