2E 2E-TMX07, Руководство по эксплуатации, Страница: 20 / 32

20
EN
POWER SUPPLY INSTALLATION AND CONNECTION
Before you begin installation and start using the power supply, we propose to study current
manual.
Step A: Removing the power supply which was installed if necessary:
If you are building a new system, go to step B.
1. Disconnect the AC power cord from the wall outlet or UPS, as well as from the existing power
supply.
2. Disconnect all cables that connect power to the graphics card, motherboard, and other
peripherals.
3. Following the instructions for the system unit, remove the power supply.
4. Go to step B.
Step B:
Power supply installation:
1. Make sure that the AC cable of the power supply is not connected.
2. Following the instructions of the computer case operation guide, install the power supply
unit and fix it with screws from assembling kit.
3. Connect the 24-pin power cable. The general 24-pin power cable is equipped with a
removable 4-pin connector, which ensures compatibility with both 24-pin and 20-pin
connectors on the motherboard.
a. If the motherboard has a 24-pin connector, you can directly connect the 24-pin power
cable from the power supply to it.
b. If the motherboard has a 20-pin connector, divide 4-pin cable from the 24-pin
connector and then connect the 20-pin cable to the motherboard without connecting the
4-pin connector.
4. Connect 8-pin + 12V cable.
a. If the motherboard is equipped with an 8-pin + 12V connector, connect the cable with
the 8-pin connector directly to the motherboard.
b. If the motherboard has a 4-pin connector, divide 4-pin cable from the 8-pin connector
and then connect the 4-pin cable directly to the motherboard.
5. Connect the peripheral cables, PCI-Express and SATA cables.
a. Connect the peripheral cables to the power connectors of the hard drive and CD-ROM
/ DVD-ROM.
b. Connect the SATA cables to the power connectors of the SATA hard drive.
c. If necessary, connect the appropriate PCI-Express cables to the power connector on
the PCI-Express graphics card.
d. Connect peripheral power cables to any peripherals with a small 4-pin connector.
e. Make sure all cables are securely connected.
6. Connect the AC power cable to the power supply and turn it on by turning the switch to
the ON position (it is marked with an «I»).