2E 2E-AHT2000, Руководство пользователя

Страница: 4 / 32

EN
4
straight out, never remove the plug by pulling on the cord.
2.2.14 Keep the heater far from curtain or places where the
air inlet can easily be blocked.
2.2.15 The power coupler is waterproof when not in use. In
order to prevent possible electric shock or leakage current
,never use the appliance with wet hand or operate the
appliance when there is water on the power cord.
2.2.16 Do not dispose of electrical appliances as unsorted
municipal waste, use separate collection facilities. Contact
you local government for information regarding the
collection systems available. If electrical appliance are
disposed of in landfills or dumps, hazardous substances
can leak into the groundwater and get into the food chain,
damaging your health and well-being.
3. Introduction
3.1 It incorporates a thermostat and a self-resetting
thermal cut-out to control the heating elements. The
thermostat feels the air temperature and controls the
surrounding temperature. The fan motor is controlled by
thermostat and it stop working when the thermostat cuts
off the heating element for 2E-AHT2000 and 2E-AHT3000.
The self-resetting thermal cut-out will switch off the
heater to ensure the safety when overheating. There is
an additional thermostat to control the fan motor. If the
temperature inside heater is high, the thermostat will also
turn on the fan heater despite that the heater is turned off. For
example, after operation, when the heater is turn off, the fan
motor will still operate to cool down the temperature inside.
3.2
When using the heater for the first time, you may notice
a slight emission of smoke. This is quite normal and it stops
after a short time. The heating element is made of stainless
steel and was coated with protection oil by production. The
smoke is caused by the left oil when heated.