247Security Inc. | 4400 North Point Parkway, Suite # 158, Alpharetta, GA 30022, USA | 1-866-693-7492 | www.247securityinc.com
ALTERNATIVE PROCEDURE FOR AIMING CAMERAS WITHOUT A LAPTOP
If an on-site laptop is not available to aim your cameras, use the bundled RCA Adapter to connect to a portable
television set using a composite video connector. The following is the procedure for using the RCA Adapter:
1.
Turn on your DVR and connect your cameras and cables to the DVR.
2.
Proceed to a camera of your preference and disconnect the Camera Cable from that camera port on the
DVR.
3.
Attach the Camera Cable to the rear of the RCA Adapter.
4.
Attach the long dongle of RCA adapter to the DVR.
5.
Attach your portable television set to the RCA Adapter using a composite/RCA video cable and adjust the
camera as needed from the screen.
6.
Reverse the above steps to remove the RCA Adapter and restore the connection to as it was prior.
The RCA Adapter has male and female Molex connectors that prevent the
connection of the cameras and cables in reverse.
Using this alternative method with the RCA Adapter to adjust your
cameras does not offer the ability to modify your DVR’s internal software
configuration and does not provide audio preview from the cameras’
microphones.
Thank you for choosing 247Security Inc. For any questions regarding the installation procedure, please contact 247Security Inc.
Technical Support at
1-866-693-7492.
11
