233621 ZEN, Быстрый старт

Страница: 4 / 12

Noise Cancellation Mode and
Ambient Modes
Cycle through Noise
Cancellation Mode ON,
Ambient Mode ON and
ALL OFF
Noise Cancellation Mode: Our noise canceling technology
and optimized passive isolation can suppress wide-band
ambient noise
Ambient Mode: Allows you to hear sounds around you
even while wearing the earbuds
Press thrice X3
QUICK
START
GUIDE
ZEN
Charging cable
USB-C to USB-A
x1
Ear tips
Touch pad
Earbuds LED indicator
Charging case LED indicator
USB-C Connector
x2
Earphone
x1 Charging Case
x1
Packing List
Product Illustration
User Guide
x1
Choose your ear tips
Use the touch pad
Turn On/Turn Off
Pairing
Ear tips (S/M/L X2)
*
Do not plug the earbuds into your ears without installing ear
tips, as this may damage your ears
Use touch pad to control Music volume / Play / Pause,
Pick/Hang up /Reject call, Noise Cancellation on / off,
Ambient on / off, and activate the Mobile phone's System
voice assistant for conversation
Turn On: Take out two earbuds or any one earbud from
the charging box.
Turn Off: Put the earbuds back into the charging box.
*To avoid hurting your ears, please do not apply excessive
pressure on the touch pad with your fingers (touch pad lightly)
*To avoid damaging the touch pad, please do not click on it
with any sharp objects
*If the mobile device is not connected in 5 minutes, the earbuds
will enter standby mode, you can follow step 2 to re-pair.
* The earbuds are set to Noise Cancellation Mode when powered ON
After putting the earbuds back into the charging case
and then taking out, the earbuds will automatically
connect to a recently connected mobile phone.
1. Pair and connect for the first time
Wear demonstration
After putting the earbuds into the ear, rotate and adjust
the earbud to the right depth and angle to fit the ear
canal (as shown below)
The size M ear tips are attached to the earbuds in-box.
2. Bluetooth remote disconnection and reconnect
3. Turn on to reconnect
① Remove both earbuds from the charging case;
② Put both earbuds into Bluetooth pairing mode;
③ Press and hold the touch pad until the LEDs on the
earbuds flash red 3 times;
④ Return the earbuds to the charging case and leave
them there for 10 seconds;
⑤ The pairing record is now cleared.
*
After clearing the pairing record of the earbuds, the
earbuds will enter the pairing mode directly.
4. To clear the pairing record of the earbuds
① Take out the earbuds from the charging case;
② The LEDs on the earbuds flash red and white alternately,
and the earbuds enter pairing mode;
x3 > 00:02
④ After a few seconds, a Bluetooth pairing request pop-up
window will appear, press “Pair” to connect the
second earbud;
⑤ Enjoy your Zen
③ Find "233621® Zen" on the Bluetooth list to pair the
first earbud;
on
Bluetooth
Bluetooth
Bluetooth
233621® Zen
Bluetooth
233621® Zen
pair
① If the earbuds are disconnected with the mobile
phone and return to the effective connection range
within 10 minutes, Bluetooth will automatically reconnect.
② If the earbuds are disconnected with the mobile
phone and return to the effective range after 10
minutes, Bluetooth needs to be reconnected manually.
Rotate and adjust to 45° angle position
*
For the earbuds that are not paired for the first time, when
connecting a new mobile phone, you need to touch the pad for any
earbud 3 times in a row, and the third press holding for 2 seconds,
the LEDs flash red and white alternately.
IMPORTANT!
The operation of switches on your hi-fi system may
cause clicks which at high volume settings may affect
your hearing. Therefore, always set the volume
control to minimum before switching between
different sources.
WARNING!
. To guarantee your personal safety, please ensure that
these earbuds are not worn kept in the immediate
vicinity (close than 15 cm) of a pacemaker.
· Do not insert jack plug into electric sockets.
· Supervise children when using the device, the product
is not a toy.
· Earbuds listening at high volume levels particularly
over extended periods of time may damage your hearing.
©2019 Shenzhen Grandsun Electronics Co., Ltd.