Touchclone™ EEPROM Reader
22
Touch
clone
™ Version 1.5 – Manufactured & Developed by 1
st
Call Lockouts Limited. All rights reserved 2012.
First, select the 6 bytes option and in the fields below type in the extracted data. Then select manufacturer
and check or uncheck the source button depending on whether you used AD equipment.
Then, insert an ID48 Magic II CAN transponder (of the correct manufacturer type) into the provided
transponder bucket and press next so
Touch
clone
can then write out the extracted data and the 7
th
byte as
“00.”
The above window shows the successful write.
Now take the transponder back to the vehicle and wait for the AD OBD equipment screen to update. When the
pre-code value is correct, the screen will update to say ‘Correct Transponder Yes’. If not, then take the
transponder back to
Touch
clone
and click ‘Write Next Byte’. Repeat until the value is correct.
When you’ve found the correct value, click next and the transponder will lock – you can then use your OBD
equipment to complete the programming procedure.
