ASSEMBLY GUIDE
2
Use 8pcs Screw 03 to fix the Holder 01 under the desk.
Use the supplier Cable Tie 04 to
bundle the spare webbing.
5
1
a
66.7mm 66.7mm 66.7mm
66.7mm 66.7mm 66.7mm
a
3
Attach the Stopper 02 to the Holder 01 as the above
diagram.
x4
4
base pad
Tighten
Loosen
Place Holder 01 on top of PC tower as the above
diagram. Measure the distance “a” by the tape. Make 8
marks under the desk as the below diagram for the
location you want to install this PC tower holder.
Attach the PC tower to the Holder 01 and make sure the
base pads placed in the middle of PC tower bottom. Adjust
the webbing to fasten the PC tower stably on the Holder 01.
