1byone O00QH-0501 Скачать руководство пользователя страница 2

Thank you for purchasing 1Byone wireless door chime, before use, please read carefully the following use 
instructions. Failure to do so may render your guarantee void.

1.Package Contents:
- 1×Receiver
- 1×Transmitter
- 1×User manual
- 1×3V CR2032 battery

- 1×Adhesive backing
- 3×Wall plugs
- 3×Screws

Carefully unpack and remove the contents. If any of the above items are missing or 
damage, please freely to contact with us.

2.Features :
    

 

Receiver with adjustable speaker volume

    

 

Visual blue LED indicator to assist the hard of hearing with visual notice of 

    

 

ring signal (User Selectable)

    

 

Receiver with 3 selectable operation modes:

- Bell only 
- Blue LED light only
- Bell and Blue LED light simultaneously
    

 

36 polyphonic melodies for the selection.

    

 

Push button with IP-44 waterproof 

3:Specifications:    

  

Frequency:  433±0.5MHz 

  

Operating Range: 300 feet in the open air

       Sound level (Typical): 80dB

  

Power Supplier:

  

Transmitter: 1×3V CR2032 battery (included)

  

Receiver: 2×1.5V AA batteries (not included)

Receiver is powered by 2×1.5V AA batteries(not included)
Open the battery compartment cover,insert 2 new batteries observing the correct polarity.(See picture 1-4)

Transmitter is powered by 1×3V CR2032 battery (included)
Open the back of transmitter with a small flat screwdriver,insert the battery observing the correct polarity.
Note: To replace the battery,push the tip of the metal prong located on the perimeter of the battery holder,
re-insert the new battery after the old one ejected,observing the correct polarity.

2

1

Wireless door chime kits user manual

SKU: O00QH-0501

All doorchime with Easy Chime Logo working together

1

4

5

2

3

1 x 3V Lithium

button cell

(included)

2

1

8

9

3

5

7

6

4

1. Loud speaker
2. Blue LED indicator
3.Wall mounting hole
4.Volume High/Medium/Low
5.Sound-and-Flash Switch

6.melodies selecting
7.Code-matching button
8.Waterproof bell push button
9.Transparent cover

Note: To replace the batteries,remove the used batteries from battery compartment  and re-insert the new 
batteries,observing the correct polarity.

www.1byone.com

www.1byone.com

EN

EN

Содержание O00QH-0501










Отзывы: