background image

22

23

Specifications

Turntable

Power                       

AC power adapter, DC output 15V 2400mA

Power Consumption 

70W

Turntable Speed

33 1/3, 45 RPM

Wow and Flutter

±0.15%

Signal to Noise 

-65dB

Tracking Force Range

0-6.0g

Effective Tonearm Length

8.6” (218.5mm)

Dimensions (L x W x H) 

16.34” x 14.17” x 5.51” (415 x 560 x 240mm) (lid 
closed), 16.34” x 16.34” x 16.34” (415 x 415 x 415mm) 
(lid open)

Weight                      

20.9lb (9.5kg)

Stylus

Model

Audio-Technica AT3600L

Frequency Response

20Hz - 20kHz

Channel Balance 

<2.5dB

Channel Separation

>18dB

Output Voltage

2.5mV

Recommended Load Resistance

47kΩ

Amplifier Connection

MM (Moving Magnet) - input 

Recommended Tracking Force

3.5±0.5g

Weight                       

0.18oz (5.1g)

Speaker

Output Power

18W*2

Speaker Units

Woofer: 4"   
Tweeter: 2"

Impedance

4 Ω

Frequency Response

50Hz-20KHz

Dimensions

6.3" x 6.2" x 9.8" (160 x 158 x 249mm)

Weight

8.4lbs (3.8kg)

Note: 

Design and specifications are subject to change without notice.

Disposal

Disposal of the Product

Under no circumstances should you dispose of the product in normal 
domestic waste.
This product is subject to the provisions of European Directive 2012/19/EU.

Dispose of the product via an approved disposal company or your municipal waste 
facility. Please observe currently applicable regulations.
Please contact your waste disposal center if you need any further information.

This product’s packaging is made from environmentally friendly material 
and can be disposed of at your local recycling plant.

Содержание Audio-Technica AT3600L















Отзывы: