EN
EN
3
4
Basic operation
Volume control
Press the Volume "+" or "-" to turn volume up or down, and you
will hear beep once reaching the maximum or minimum volume.
LED status indicator
Instruction
Power on
Power off
Standby
Incoming call
Pairing
LED status
Stays blue for about 1.5 seconds
Stays red for about 1.5 seconds
Blink blue twice every 5 seconds
Blink blue once every 3 seconds
Flashes Red and Blue alternately
Voice prompts
Power on
Power off
Pairing
/
Cell phone rings
Battery low
Flashes red twice every 8 seconds Battery low
Charging
Stays on red while charging,
Stays on blue after fully charged
/
Pairing
Press and hold the Power button for about 3 seconds until LED
flashes blue and red alternately, you hear "Power on" and
"Pairing", now earphone is in pairing mode.
Activate Bluetooth on your phone and set it to search for new
devices.
Select “1byone BS006". If your phone asks, enter 0000 (four
zeros) for the passcode or accept the connection. The LED
indicator stops flashing red and blue once successfully paired,
you hear "Connection successful".Some phone list an option to
"Play through earphone", select to use the earphones.
Bluetooth
ON
1byone BS006
Connect
Bluetooth
Search
Pair one phone
1.
2.
3.
