Safety information
Before you get started
The 1&1 HomeServer does not have an on/off switch. As such,
it must be possible to unplug the 1&1 HomeServer at all times.
Plug the 1&1 HomeServer into an easily accessible power
socket.
Overloaded sockets, extension cables and multiple socket
outlets can cause fires and electrocution. Avoid the use of
extension cables and multiple socket outlets wherever possible.
Do not connect several extension cables or multiple socket
outlets together.
Heat build-ups can lead to the 1&1 HomeServer and the 1&1
LTE-Antenne (1&1 LTE antenna) overheating. This could damage
the devices. Ensure there is sufficient air circulation around the
devices. Ensure that the ventilation slots on the housing of the
1&1 HomeServer remain unobstructed. Do not place the 1&1
HomeServer on rugs, carpets or upholstered furniture. Do not
cover the 1&1 HomeServer.
The underside of the 1&1 HomeServer may become warm
in normal operation. This heat may cause damage to heat-
sensitive surfaces. Do not place the 1&1 HomeServer on heat-
sensitive surfaces.
In the case of storms, there is a risk of lightning strike, which
could lead to surge damages to connected electronic devices.
Do not install the 1&1 HomeServer during a storm. In the case
of storms, unplug 1&1 HomeServer and disconnect the DSL or
VDSL connection.
If moisture or liquid reaches the 1&1 HomeServer or 1&1
LTE-Antenne, it could lead to electric shocks or short circuits.
Only ever use the 1&1 HomeServer and 1&1 LTE-Antenne
inside buildings. Do not allow any liquids to get inside the 1&1
HomeServer.
There is a risk to users if the 1&1 HomeServer or 1&1 LTE-An-
tenne are opened incorrectly or if improper repairs are carried
out. Do not open the housing of the 1&1 HomeServer or 1&1
LTE-Antenne. If repairs are needed, return the 1&1 HomeServer
or 1&1 LTE-Antenne to 1&1.
Dust, moisture and steam, as well as strong detergents or
solvents can damage the 1&1 HomeServer. Protect the 1&1
HomeServer from dust, moisture and steam. Always unplug the
1&1 HomeServer before cleaning. Clean the 1&1 HomeServer
with a damp, lint-free cloth.
Do not use the 1&1 HomeServer or 1&1 LTE-Antenne in areas
where the use of wireless equipment is forbidden. Follow the
relevant signs or instructions from authorised personnel.
During installation and operation of the 1&1 HomeServer and
the 1&1 LTE-Antenne, ensure that people maintain a distance
of at least 20 cm.
Do not install or operate your 1&1 HomeServer or 1&1 LTE-
Antenne near flammable gases or in areas where there is a risk
of explosion.
4
