101 Sampling Solutions 2100R, Руководство по эксплуатации и техническому обслуживанию

Страница: 12 / 33

12
Feed direction: The feed direction valve has 3 positions, up for drilling operations,
spring centred neutral and down for lifting the drill string.
Remote Emergency Stop: (Option). To stop the drill operation, push the red button in
sharply. To reset, twist the knob.
Caution: It is recommended this is only used in a genuine emergency as stopping the
engine under full load may cause damage to the engine and drill components.
The emergency stop should be tested periodically with the engine at idle.
Normal engine stop should be done in accordance with the engine manual.
Either push in for fast slowing of the engine or twist if fine control is required
Figure 1-Drill Function
Rotation
Feed
Pump
Injection
Bottom
Clamp
Top Clamp
Rotating
Clamp
Figure 2 shows Radio Remote Control. Air Valve and Air Flow must not
be used unless the compressor is connected and operating. For more
information please refer to the manual.