100FIT 150B, Руководство пользователя

Страница: 18 / 21

mode (picture 2).
3.2 Standby mode
：
A. After power on, the console enter into SCAN- standby mode: STROKES-TIME-DIST- CAL- PULSE will display
circularly 5 seconds in turn. (picture 2~picture3)
B. In standby mode, no input of key operation or RPM signal or pulse input for 4Min, LCD will go to Sleeping mode.
Picture 3
2. In standby mode, press MODE KEY, user can select STROKES-TIME-DIST-CAL-PULSE
to set training mode.Press UP/DOWN to set target exercise value. If there is sensor signal input, set the target value, the
console will count down form the target value to zero.( if there is no signal input, the value will cycle count.
）
A. STROKES setting range: 0~9990 (press UP/DOWN to increase/decrease, press RESET, all value will return to
zero.)
B.TIME setting range : 0:00~99:00 (press UP/DOWN to adjust,each increment/ decrease value is 1. Press RESET, all
value will return to zero.)
C.DIST setting range : 0~99.50 ( press UP/DOWN to adjust, each increment/decrease value is 0.5. Press RESET, all
value will return to zero.)
D.CAL setting range: 0~9990 ( press UP/DOWN to adjust,each increment/ decrease value is 10. Press RESET,all value
will return to zero.
E. PULSE setting range: 30~240 (the preset value is 30, press UP/DOWN,each increment/decrease value is 1. Press
RESET, all value will return to zero.)
F. In standby mode, press MODE+UP for 3 seconds which can pow off quickly.
4
、
If there is RPM signal input in any mode,the console will QUICK START immediately.
If there is no RPM signal input more than 5 seconds, the system will STOP
automatically.The value of STROKES,TIME, DIST, CAL and PULSE remain unchanged.
5
、
If there is PULSE signal input and appear heart rate value in any mode,
press RECOVERY KEY
（
picture 4~picture5
）
1. After the console displayed PULSE value, press this key,all display functions will stop display
immediately ,except TIME and PULSE.
2. TIME display "1:00" and begin to count down( If there is no PULSE input in count down period, it doesn’t
affect the automatic time to power off) When it counts down to zero, LCD will only display “FX”(X value
is 1~6) in the windows,if user press any key, it will skip to the normal display system. STOP
，
TIME,DISTANCE,CALORIES,PULSE,TOTAL STROKES and STROKES will display the current
training value.
3. After“FX”was displayed, press each key to recover to the general display. If user press the RECOVERY
key again, it will carry out again.
4. In RECOVERY period, press this key can recover.
Button Function ：
1.
UP KEY
A. STROKES setting range: 0~9990 (press UP/DOWN to adjust, each increment is 1. Press RESET, all value will return
to zero.)