PLACE DISPENSER ON BOX
WITH HANDLE PARALLEL TO
SURFACE & PRESS
WHILE PRESSING, ROLL TAPE
ONTO BOX
KEEP ON ROLLING
- - PLEASE SEE OTHER SIDE - -
PRESS TAPE FIRMLY TO BOX
(MAKE SURE IT STICKS WELL)
LIFT GENTLY TO CUT
TURN RUBBER ROLLER TO
ADVANCE AROUND 1/2” OF
TAPE ONTO FINGERS
PULL OUT MORE TAPE
AND PLACE ONTO BOX
PRESS DOWN AS YOU
ROLL TAPE ONTO BOX
1
HOLD TAPE IN PLACE
WHILE HOLDING TAPE TO BOX,
LIFT DISPENSER UP GENTLY
TO CUT
TWO HANDED
ONE HANDED
OR
TSPD-01
3
3
4
5
2
1
4
5
2
USE ‘ONE HANDED’ OR ‘TWO HANDED’ OR ANY COMBINATION *
*
PLEASE NOTE: After using Zippy the ‘two handed’
way for a while, you’ll probably use it ‘one-handed’
most of the time.
There are many variables while taping; the particular
tape and box you’re using, size of the box, your
position relative to the box, box or other item such as
envelope, personal preference, etc. - so, you’ll probably
enjoy the fact that Zippy was designed to be used in
many possible ways to suit your needs.
Dust: Keep your rubber roller free of dust by following
instructions (see other side) to clean periodicaly. If
using with dusty boxes, you can prevent dust from
reaching roller by starting with #1, top left - turn
rubber roller... before continuing either ‘one’ or ‘two
handed’.
CONTINUED
