background image

 

 

 

 

 

 

 

 

    

 
 

 

 

Rev.7a (for units from ser.no. 51053/built 2010)   26.01.2010   This document substitutes previous versions    page 1 of 34 

Zähl Elektronik-Tontechnik • Odenthaler Str. 47 • D-51465 Bergisch Gladbach • [email protected] • www.zaehl.com 

Distributor (National/International):  

sono Studiotechnik GmbH • Haagerstraße 5 • D-81671 München • Tel. +49 89 419671-0 •

 

[email protected]

 • 

www.sono.de

 

AIRCOM Manual

 

from ser.no. 51053/built 2010 

AIRCOM 

 

       

Dual Commentator’s Unit 

 

 

 high level of functionality 

• 

sophisticated configuration, also 

  applicable as interpreter unit 

• 

easy handling 

 compact design  

 reliable in operation 

 versatile link features 

 
 

AIRCOM provides ON-AIR and Intercom functionality for two commentators featuring great audio 

performance and a high level of functionality. 
AIRCOM is designed for the use with reportage- und SNG-units, for mobile broadcast setups and 

studio applications. 
Use AIRCOM’s comprehensive configuration and remote control features and just work your way – on 

whatever demanding application: commentator, interpreter* or voice-over. 

(*AIRCOM-IR Interpreter Remote unit available as optional accessory)  

Straight forward analogue design with clear and intuitive handling -  highly appreciated by every 

operator. Furthermore, AIRCOM’s versatile link features make it easy to integrate into latest broadcast 

technology. 
 

A cover on the front panel hides switches and 

trimmer potentiometers which are used for 

setting up the unit. When closed after  
configuration, easy handling and safe 

operation are guaranteed.  

standard audio I/O as XLR 
37pole Sub-D with GPI I/O und audio I/O 
for linking with other system components 

like intercom-systems, failsafe transmission 

lines etc. 

Summary of Contents for AIRCOM



































Reviews: