background image

445348-YTG-D-0612

FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE

TECHNICAL GUIDE

GAS-FIRED RESIDENTIAL 
SINGLE STAGE MULTI-POSITION 
GAS FURNACES
STANDARD & Low NOx MODELS

MODELS: TM8X / TMLX

NATURAL GAS
60 - 120 MBH INPUT

Due to continuous product improvement, specifications 
are subject to change without notice.
Visit us on the web at www.york.com

Additional rating information can be found at 

www.ahridirectory.org

WARRANTY

20-year limited warranty on the heat exchanger.
10-year heat exchanger warranty on commercial applications.
Standard 5-year limited Parts warranty.

Extended 10-year limited parts warranty when product is
registered online within 90 days of purchase for replace-
ment or closing for new home construction.

DESCRIPTION 

These compact units employ induced combustion, reliable hot
surface ignition and high heat transfer aluminized tubular heat
exchangers. The units are factory shipped for installation  in
upflow or horizontal applications and may be converted for
downflow applications.

These furnaces are designed for residential installation in a
basement, closet, alcove, attic, recreation room or garage and
are also ideal for commercial applications. All units are factory
assembled, wired and tested to assure safe dependable and
economical installation and operation.

These units are Category I listed and may be common vented
with another gas appliance as allowed by the National Fuel Gas
Code.

FEATURES

Easily applied in upflow, horizontal left or right, or downflow
installation with minimal conversion necessary.

Compact, easy to install, ideal height 33" tall cabinet.

Blower-off delay for cooling SEER improvement.

Easy access to controls to connect power/control wiring.

Built-in, high level self diagnostics with fault code displays
standard on integrated control module for reliable operation.

Low unit amp requirement for easy replacement application.

All models are convertable to use propane (LP) gas.

Electronic Hot Surface Ignition saves fuel cost with increased
dependability and reliability.

100% shut off main gas valve for extra safety.

5 speed direct drive, X13 style high efficiency DC motor.

24V, 40 VA control transformer and blower relay supplied for
add-on cooling.

Hi-tech tubular aluminized steel primary heat exchanger.

Timed on, adjustable off blower capability for maximum
comfort.

Blower door safety switch.

Solid removable bottom panel allows easy conversion.

Low NOx models have been designed to meet specific code
requirements.

Airflow leakage less than 1% of total airflow at ductblaster
conditions.

No knockouts to deal with, making installation easier.

Movable duct connector flanges for application flexibility.

Quiet inducer operation.

Inducer rotates for easy conversion of venting options.

Fully supported blower assembly for easy access and
removal of blower.

External air filters used for maximum flexibility in meeting
customers IAQ needs.

Venting applications - may be installed as a common vent
with other gas-fired appliances or use a masonry chimney.

1/4 turn knobs provided for easy door removal.

High-efficiency blower motor for lower electrical power usage
and improved A/C SEER ratings.

Insulated blower compartment for thermal and acoustic
performance.

Reviews: