![background image](http://html1.mh-extra.com/html/yooda/cortino-dt72le-series/cortino-dt72le-series_manual_3488206001.webp)
The motors of the DT72LE/S series are motors with two-way
communication and with radio receiver, which together with
the curtain rod are designed to automate curtains and enable
wireless control using a remote control. They have electronic
limit switches that are set automatically. The DT72LE/S series
motors are compatible with all YOODA Smart Home System
transmitters.
Radio receiver memory:
up to 10 transmitters
Power supply:
14,8 V DC
Operating temperature:
from 0°C to 50°C
Protection degree:
IP 40
Load:
do 50 kg
Maximum continuous work time:
6 min.
Motor for curtains DT72LE/S
Non-compliance with the specification might cause risk for life or health and can determine proper work of the curtains.
We strongly recommend to comply with the specification.
MOTOR FOR CURTAINS DT72LE/S
www.sukcesgroup.pl
1. General information
2. Safety measures
Before installing or using motor please read the following instruction. The installer must comply with the standards and regulations in
force in the country where the appliance will be installed and provide information to users about the conditions and maintenance of the
device. Failure to follow these instructions can present risk to life and health, or invalid functioning of the roller shutter. This also results
in the loss of warranty rights.
1
PROGRAMMING BUTTON FUNCTIONS:
1. Pressing the programming button for 2 secons enters the motor into the transmitter programming mode.
2. Pressing the programming button for 6 seconds changes work motor direction or switch configuration.
3. Pressing the programming button for 10 seconds deletes the motor memory and restores the factory settings.
The DT72LE/S series are motors with two-way communication system.
switch socket
charging socket
LED diode
battery
programming
button