![background image](http://html2.mh-extra.com/html/yooda/cortino-dt72le-series/cortino-dt72le-series_quick-start-manual_3477938001.webp)
switch socket
Motors of the DT72LE series are motors with a radio receiver,
which together with the curtain rod are designed to automate
curtains and enable wireless control using a remote control.
They have electronic limit switches that are set automatically.
The DT72LE series motors are compatible with all YOODA and
CORTINO brand transmitters.
Radio receiver memory:
up to 20 transmitters
Power supply:
14,8 V DC
Operating temperature:
from 0°C to 50°C
Protection degree:
IP 20
Load:
up to 50 kg
Maximum continuous work time:
6 min.
Motor for curtains DT72LE
Non-compliance with the specification might cause risk for life or health and can determine proper work of the blinds.
We strongly recommend to comply with the specification.
MOTOR FOR CURTAINS DT72LE
www.sukcesgroup.pl
1. General information
2. Safety measures
Before installing or using motor please read the following instruction. The installer must comply with the standards and regulations
in force in the country where the appliance will be installed and provide information to users about the conditions and maintenance
of the device. Failure to follow these instructions can present risk to life and health, or invalid functioning of the roller shutter. This
also results in the loss of warranty rights.
Electrical system control should be performed
regularly to detect any signs of use or damage
of the motor.
Motor cables should be fixed in such a way that they
have not been damaged by working curtain.
Motors torque parameter should be adequate to the
weight of the curtain.
Switch off the power supply before any installation
or maintenance operation.
All contact of the motor with any liquids should
be reduced to minimum.
Motor and its control system should be kept
out or reach of children.
The switch should be mounted at a height of not less
than 140 cm, and at such a distance from the curtain to
be able to observe its operation during use.
1
charging socket
LED diode
battery
programming
button