Call Mute
•
Press
•
Press
to mute the microphone during a call.
again to un-mute the call.
Placing a Call
Using the handset:
1.
Pick up the handset.
2.
Enter the number and press the
Send
soft key.
Using the speakerphone:
1. With the handset on-hook, press
2. Enter the number and press the
Send
soft key.
Using the headset:
1. With the headset connected, press
to activate
the headset mode.
2. Enter the number and press the
Send
soft key.
Answering a Call
Using the handset:
Pick up the handset.
Using the speakerphone:
Press .
Using the headset:
Press .
You can reject an incoming call by pressing the
Reject
soft key.
Ending a Call
Using the handset:
Hang up the handset or press the
EndCall
soft key.
Using the speakerphone:
Press or the
EndCall
soft key.
Using the headset:
Press the
EndCall
soft key.
• Press to enter the
Placed Calls
list, select the
desired entry, and press or the
Send
soft key.
• Press twice when the phone is idle to dial out the
last dialed number.
Call Hold
To place a call on hold:
Press the
Hold
soft key during an active call.
To resume
the call, do one of the following:
•
If there is only one call on hold, press the
Resume
soft key.
•
If there is more than one call on hold, select the desired
call, and press the
Resume
soft key.
Call Transfer
You can transfer a call in the following ways:
Blind Transfer
1.
Press the
Trans
soft key during an active call.
2.
Enter the number you want to transfer to.
3.
Press the
B Trans
soft key.
Semi-Attended Transfer
1.
Press the
Trans
soft key during an active call.
2.
Enter the number you want to transfer to, and press
the
Send
soft key.
3.
Press the
Trans
soft key when you hear the ring-
back tone.
Attended Transfer
1.
Press the
Trans
soft key during an active call.
2.
Enter the number you want to transfer to, and press
the
Send
soft key.
3.
Press the
Trans
soft key when the second party
answers.
Smart Choice Communications
|
(800) 217-3096
|
www.smartchoiceus.com
|
© 202
1
Smart Choice Communications, LLC
YEALINK
T33
- USER GUIDE
Redial
