Yawarra nuxV 1600 Quick Start Manual Download

Page: 1 / 4

Dual rack mount nuxV 1600

Quick Start Guide

Thank you for purchasing a dual rack mount nuxV 1600 server.

Your package should contain:



1RU server case



Cover plate and hex screws for empty board slots

Optional Extras



1 or 2 x mounting kits to suit the nuxV 1600 board

➢

punched cover plate, 2 x hex screws, hex key, board mounting plate, hard

drive mounting plate, CPU heat bridge, 13 x M3 x 5 screws, 4 x M3 x 16

brass standoffs, 2 x serial port screws, data cable, power cable



1 or 2 x nuxV 1600 boards (plus 1 x power supply per board)

Please read the following instructions to begin using your dual rack mount nuxV 1600.

April 2014

Summary of Contents for nuxV 1600

Page 1: ...x mounting kits to suit the nuxV 1600 board punched cover plate 2 x hex screws hex key board mounting plate hard drive mounting plate CPU heat bridge 13 x M3 x 5 screws 4 x M3 x 16 brass standoffs 2 x...

Page 2: ...3 1 Remove the five 5 screws from the top of the case and remove the top of the case 2 Attach the board to the mounting plate using the M3 x 16 standoffs Note Steps 3 to 10 are only required if you ar...

Page 3: ...oot the board The nuxV 1600 boards support many operating systems including BSD Linux and a number of proprietary operating systems Installation Insert the CF card into the socket label up Ensure the...

Page 4: ...trol Step 5 Apply power Connect IEC cable to socket at rear of case and turn switch to on The board will go through its boot up cycle which you can watch if you are connected to the serial console You...