4.Specifications
CCTV
CCTV
TECHNICAL SUPPORT:
For Technical Support for any Xvision product please contact your local distributor.
LIMITED WARRANTY:
This product is supplied with a 1 Year warranty. The Warranty excludes products that have been misused,
(including accidental damage) and damage caused by normal wear and tear. In the unlikely event that you
encounter a problem with this product, it should be returned to the place of purchase.
Models:
TP1210A / TP1220A
12V DC 9 output 10A / 18 output 20A,
Professional Wall Mount Power Supply
Manufactured exclusively for Xvision
Model:
TP12xxA Series
12V DC PTC fused protected outputs,
Professional Wall Mount Power Supply
Before you begin
•
Power to the unit should be correct for local electrical appliance standards & regulations.
•
Ensure the AC Input power is off before working with the unit.
•
The Unit will supply a constant voltage to all Output contacts as specified. Each Output
is protected with a PTC fuse, this will auto reset and stop any short circuit causing
damage to the device. The fuse will auto reset, note: All other Outputs will be
unaffected.
•
The unit is protected against reverse polarity and fuse fault. Should the common supplied
output be short circuited, the unit will drop the voltage until the fault is corrected. It
will
immediately reset the voltage when the fault is removed. The same applies when
exceeding the Current specification.
Model:
TP1210A
TP1220A
Input Power:
120 / 240V AC @ 50/60Hz
Output Power:
12V DC
Total Output Current (Max):
10A
20A
Output Current (Max) per port:
Fuses Rating at:
2.5A for each port, however max current cannot exceed the total
capacity of units rating.
Main Fuse Rated at:
250V 3A
Mounting:
Wall
Weatherproofing:
No
Dimensions:
187 x 226mm
281 x 255mm
