4x8 4K HDR Matrix Kit with 6 HDBaseT/2 HDMI Outputs
MXV-0408-H2A v2
Quickstart Guide
Copyright © 2019 WyreStorm Technologies |
MXV-0408-H2A v2 Quickstart Guide | 190517
UK: +44 (0) 1793 230 343 | ROW: 844.280.WYRE (9973)
1 of 4
WyreStorm recommends reading through this document in its entirety to become familiar with the product’s features prior to starting the
installation process.
Basic Wiring Diagram
IMPORTANT! Installation Requirements
• This product was released in multiple versions which contain different
chassis designs and/or feature sets. Content within this QSG is for the
version 2 of this product.
• Refer to Identifying Product Versions for details.
• Visit the product page to download the latest firmware, document version,
additional documentation, and configuration tools.
• Read through the
section for important wiring
guidelines before creating or choosing premade cables.
• While this product supports CEC for the HDMI outputs, WyreStorm cannot
guarantee compatibility with all forms of CEC communication.
In the Box
1x MXV-0408-H2A Matrix
1 x AC Power Cord with EU pins
1 x AC Power Cord with US pins
1 x AC Power Cord with UK pins
1 x AC Power Cord with AU pins
1x IR Remote (CR2025 Battery not Included)
4x IR Emitter
6x IR Receiver
2x Matrix Mounting Brackets with screws
1x Quickstart Guide (this document)
HDMI to display
IR TX
IR RX
RXV-35-4K (Receiver)
HDMI to display
Amplifier
IR TX
IR RX
HDMI from source
HDMI from source
IR TX
HDMI to display
LAN Cat6a/7
AC Mains
Power
Cat6a/7
Cat6a/7
Blu-ray Player
Satellite Box
RXV-35-4K (Receiver)
Matrix Control Only
IR
Control System
CAB-IR-LINK (Sold Separately)
Wireless Router
MXV-0408-H2A (Matrix)
Receivers
powered by
KEY
HDMI
HDBaseT / Ethernet
Control
Power
Digital Audio
Identifying Product Versions
This product as been released under multiple versions which contain either different chassis designs and/or feature sets. Content within this QSG is for the
version 2 of this product. Information on other versions can be found within the matching QSG.
Each product version is identified by a v# after the product number on the product and outer packaging. Note that a version of this product may not contain this
identifier while all versions above v1 will have the version indicated.
