![background image](http://html.mh-extra.com/html/woodhaven/8660/8660_owners-manual_994897001.webp)
8660
SOSS 100 Hinge Jig
Owners Manual
Please Read Carefully!
ASSEMBLY
Insert the two 1/4-20 x 3/4" flat head screws
(MF010)
thru the larger countersunk holes in the SOSS Hinge Jig
(8660B)
. Start a 1/4-20 oval nut
(5760B - flat side first)
on the
end of each screw. Slide the 12" Double Track
(4012)
on to
the oval nuts and in the groove in the underside of the Hinge
Jig until centered end-to-end, then tighten the screws.
Insert the two 10-24 x 5/16"
flat head screws
(MF001)
thru the
remaining two countersunk holes
in the Hinge Jig and start a 10-24
oval nut
(5750B - raised side first)
on the end of each screw.
Slide a 2-7/8" One Track
(8660T)
on to each oval
nut and in to the grooves in the underside of the Hinge Jig
until covering the oval nut, then tighten each screw.
BEFORE BEGINNING
Identify and verify that you have all the parts listed.
Read thru the instructions at least once, familiarizing
yourself with the parts and their use before proceeding. You'll
need a #2 & #3 Phillips screwdriver for assembly.
The
8660 SOSS Hinge Jig
is designed to work with a 5/8"
bushing & locknut
(our PN 5030K)
and a 3/8" upcut spiral bit
(our PN
15406)
. If you have your own 3/4" bushing, make sure the nose isn't
over 3/8" long. You'll need a plunge router to cut the hinge mortises.
The quality of the plunge mechanism can effect the size of the mortise,
resulting in a poor fit if the plunge mechanism has excessive slop.
MF010 x2
5760B x2
5750B x2
MF001 x2
86
60
Hi
ng
e J
ig
for
SO
SS
10
0 H
ing
e
40
08
866
0T x
2
Parts List:
Please identify and verify that you have all of the parts
listed below prior to assembly.
Part
Description . . . . . . . . . . . Quantity
8660B
Hinge Jig for SOSS 100 . . . . . . . . . . . . . . . . . . . 1
4008
8” Double Track . . . . . . . . . . . . . . . . . . . . . . . . . 1
MF010
1/4-20 x 3/4" flat head screw . . . . . . . . . . . . . 2
5760B
1/4-20 oval nut . . . . . . . . . . . . . . . . . . . . . . . . . 2
8660T
2-7/8" One Track . . . . . . . . . . . . . . . . . . . . . . . . 2
MF001
10-24 x 5/16” flat head screw . . . . . . . . . . . . . 2
5750B
10-24 oval nut . . . . . . . . . . . . . . . . . . . . . . . . . . 2