![background image](http://html1.mh-extra.com/html/wisi/a2b-esx-200/a2b-esx-200_upgrade-instructions_989525001.webp)
Page 1
August,
2016
Instruction on how to upgrade ESX-200, ETX-200 and ECX-200
from firmware version 1.1 or later to version 1.35.3
NOTE!
UPGRADE LICENSE KEY (art.no 150001.01)has to be
valid before you start to upload FW 1.35.3. Reboot the unit
before uploading 1.35.3. If SLA is not valid you must buy SLA
(Upgrade license key)first.
NOTE!
If FW version is before 1.2 in the unit, please stop all
analogue decoding and remove CA module before starting the
upgrade procedure.
1.
A) Connect your PC to the EXM (direct or through switch) unit that you
want to upgrade.
B) Stop IPTV if running.
C) Restart the EXM unit and make sure that it starts correctly.
D) If you have FW version 1.2 or later you can proceed with 3.
2.
Upload the file EXX200_EXMRELEASE2-FW-1.35.3.bin in the Upgrade
menu that you find in the System options menu and wait for
the message “Upload completed”. Restart the unit.
3. Upload the file EXX200_1.35.3.bin in the Upgrade menu that you
find in the System options menu and wait for the message “Upload
completed” Restart the unit. READY!
It is extremely important that you follow the instruction below,
otherwise the upgrade will fail!
Be aware of that LCN type is set to “Undefined” if FW
versions below 1.2 is in the unit before the upgrade
. When
downloading the zip file, unzip and download the two release
files to your PC.