![background image](http://html1.mh-extra.com/html/williamson/350-vsl/350-vsl_operators-manual_982599001.webp)
www.wmcpumps.com
+44(0)1273 857752
Williamson Manufacturing Co Ltd
Unit 5, Lady Bee Industrial Estate
Albion Street
Southwick
West Sussex BN42 4EP UK
Email:
The Williamson Manufacturing Company Ltd provides no
warranty on usage of pumps. We recommend that life tests be carried out
prior to use. This information is given in good faith and believed to be correct
at the time of publishing. The Williamson Manufacturing Company Ltd cannot
accept responsibility for inaccuracy or any errors contained herein. Copyright
the Williamson Manufacturing Company Ltd 2008.
350 VSL Operator Manual
SAFETY, CAUTIONS AND WARNINGS
INSTALLATION
1-2
350 VSL CONTROLS AND CONNECTORS
AND MATERIALS OF CONSTRUCTION
3
350 VSL SERIES PUMP SPECIFICATIONS
4
OPERATION / TUBING INSTALLATION
OPTION AND FLOW RATES
5-6
FUSE REPLACEMENT / ROLLER
ASSEMBLY REPLACEMENT PROCEDURES
7
TROUBLESHOOTING / REPLACEMENT
PARTS
8
Table of contents.
Note:
Every precaution for accuracy has been taken in the preparation of this manual, however, Williamson
Manufacturing Co Ltd. neither assumes responsibility for any omissions or errors that may appear nor assumes
liability for any damages that result from the use of the products in accordance with the information contained in
this manual.
POTENTIAL RISK OF ELECTRIC SHOCK
DO NOT
use DC motor pump with a damaged or altered power cord or power supply. Contact the
factory or an authorized service facility for repair.
Disconnect power cord before moving or disposing of pump.
CAUTION – This Pump Has Been Evaluated with Water Only.
WARNING -
Risk of electric shock – This pump is supplied with a grounding conductor and grounding-
type attachment plug. To reduce the risk of electric shock, be certain that it is connected only to a
properly grounded, grounding-type receptacle.
Before installing or servicing the pump, read the pump manual for all safety information and
complete instructions. Installation and Product must adhere to all regulatory and compliance codes
applicable to the area.