GENERAL INFORMATION
1.
A qualified electrician, in accordance with IEE wiring regulations, should carry out
connection to mains wiring.
2.
Ensure that the rated voltage and frequency requirements are compatible with the
available mains supply.
3.
Cleaning of reflectors and lenses should be carried out using clean, soft and lint free
cloths and anti-static cleaning fluid.
4.
Do not carry out high voltage insulation test, i.e. 500/1000v this may damage internal
components.
5.
Electrically isolate this luminaire during maintenance.
6.
Replacing the light source within this luminaire shall only be carried out by the
manufacturer, service agent or a similar qualified person.
Whitecroft Lighting Limited
Burlington Street, Ashton-under-Lyne, Lancashire OL7 0AX
Tel44 (0)870 5 087 087 Facsimile: +44 (0)870 5 084 210
Registered No. 3848973 England
Registered Office:
As above
PK-LEAF-FOILSRD
TECHNICAL SUPPORT
Tel: 0161 331 5700
e-mail:
www.whitecroftlighting.com
Foil SRD
Installation Leaflet
June 2016 - Rev1
SPECIFICATION
Lumen packages:
4800lm/6000lm/7200lm
Finishes:
Body
Silver RAL 9006 30% gloss polyester powder-coat
White RAL 9003 30% gloss polyester powder-coat
Geartray
White Reflective gloss polyester powder-coat
Materials:
Main body
- 0.9mm micro perforated mild steel
Canopy/Gear Tray - 0.7mm mild steel.
Diffuser
- Extruded polycarbonate
Acoustic absorbers - 80Kg/m
3
Tissue wrapped compressed fibreglass
Control Gear:
Fixed Output/DALI control gear as specified
Operating Temp:
25°C
Supply:
220-240v 50/60hz AC
Connection:
Unfused 2.5mm terminal block (10mm wire strip length)
IP Rating:
IP20
May 2018 - Rev2
