![background image](http://html.mh-extra.com/html/whirlpool/pure-ac-8420/pure-ac-8420_manual_970430001.webp)
1
MACHINE OPERATION
Additional information (including troubleshooting and service) can be found in the individual chapters of
the Instructions for use.
Sort laundry according to
care symbols
Do not tumble dry
Suitable for tumble drying –
at low temperatures
Suitable for tumble drying
Sort laundry by:
Material thickness:
whenever there is greater load than the dryer can handle, separate
laundry according to weight (e.g. dry towels and thin underwear separately).
Type of material:
cotton (linen); synthetic textiles (easy care).
Degree of drying:
cupboard dry, iron dry etc.
Do not tumble dry:
nylon stockings, delicate embroidery, fabrics with metallic decorations.
Preparing laundry
Check that all fastenings are closed and that pockets are empty.
Please ensure that there are no cigarette lighters in the laundry.
Turn laundry inside out.
Loading dryer
Place laundry loosely in the drum to achieve equal drying throughout.
Then close the door.
Selecting programme
Select the drying programme required by turning the programme selector knob (for
information, refer to programme table).
If you do not start the programme soon after having made your choice, the dryer will switch
off after a few minutes.
To switch the dryer on again turn the programme selector knob to
“Off” (“0”)
and afterwards
to the desired programme.
Selecting options
(if available)
Select the option required by pressing the corresponding button.
The indicator lamp above the relevant button lights up to confirm your selection.
A fast blinking lamp indicates a wrong selection is made (incompatible options).
Press the button again to cancel the option.
Starting dryer
The drying programme is started by pressing the
“Start (Pause)”
button.
The relevant indicator lamp lights up.
Changing programme selection:
If the programme selected is changed during drying, the
dryer stops.
The
“Start (Pause)”
indicator lamp flashes.
To operate the new programme, press the
“Start (Pause)”
button again.
Interrupting programme:
To interrupt a drying cycle, press the
“Start (Pause)”
button and
open the door.
Wait at least 5 minutes, to allow the laundry to cool down, before you unload the dryer.
For your safety the drying cycle stops automatically if you open the door.
To restart, after door opening, close the door and press the
“Start (Pause)”
button again.
Warning:
Never stop a tumble dryer before the end of the drying cycle, unless all items are
quickly removed and spread out so that the heat is dissipated.
Programme end –
unloading dryer
The final part of a drying cycle occurs without heat (cool down cycle) to ensure that the items
reach a lower temperature to avoid wrinkling.
End:
Take the laundry out of the dryer.
The drying process is complete.
Anticrease:
If the laundry is not removed at the end of the drying cycle, an automatic
anticrease cycle will operate for maximum 15 min (by choosing the option
“Anticrease”
this
time can be extended up to 12 hours).
The drum rotates to prevent the laundry from creasing.
After the end of the
“Anticrease”
the dryer will switch off after a short time, to save energy.
Switching dryer off
Set the programme selector knob to
“Off” (“0”)
.
Cleaning the door filter after every cycle:
open door, pull door filter up and out of machine and open it. Brush lint using a soft brush or
your fingertips. Close door filter and push firmly back into place.
Emptying water container:
pull container out by the handle and empty. Replace the container when empty by pushing it completely
back into place.
Please note:
Only use additives/plastic items specified as dryer safe and rinse items that have been treated with stain remover
thoroughly in plenty of water before drying. Never dry rubber objects or objects stained with vegetable oils in the dryer.
The Manufacturer is not liable for any damage to laundry resulting from inadequate or incorrect fabric care instructions which have been
provided with the garment or article.
Power consumption: in off-mode 0.11 W / in left on-mode 0.11 W
.