background image

You can download the Safety Instructions, User Manual, Product Fiche and Energy data by:

•  Visiting our website -

 

docs.whirlpool.eu

•  Using QR Code

•  Alternatively, 

contact our After-sales Service

 (See phone number  in the warranty booklet). When 

contacting our After-sales Service, please state the codes provided on your product’s identifi cation plate.

THANK YOU FOR BUYING A WHIRLPOOL PRODUCT.

In order to receive a more complete assistance, 

please register your product on 

www.whirlpool.eu/register

EN

Quick guide

Before using the appliance carefully read the Safety Instructions.

xxxxxxxxxxxx

 xxxx

Before using the appliance carefully read the Safety Instructions.

xxxxxxxxxxxx

 xxxx

PROGRAMS

Eco Cotton   

kg Max* Time 197' 

Standard cotton programme, suitable to dry normally wet cotton 

laundry. Most efficient programme in terms of energy consumption 

for drying cotton laundry. The values on the Energy Label are based on 

this programme.

Mixed 

 

kg 4 Time 184'

This programme is ideal for drying cotton and synthetic fabrics 

together.

Bed Linen   

kg Max* Time

 240'

 

This programme is intended for drying cotton sheets. 

Shirts  

 

kg 3 

 

Time

 137'

 

This is a programme for Shirts made from cotton or  cotton 

blend/synthetics.

Sport 

 

kg 4 Time 75'

For drying sports garments made of synthetics or cotton.

Duvet 

 

Time 179'

Programme intended to dry bulky garments, as single duvet.

Jeans 

 

kg 3 Time 135'

For drying cotton jeans-wear and garments made of robust 

cotton, like denim, such as trousers and jackets.

Easy Ironing 

This cycle allows to extend the fibres of garments thus making 

ironing and folding easier. Do not use in case of garments that are 

still wet. Suitable for small loads of cotton textiles or cotton blends.  

FIRST TIME USE

Make sure that the water tank is correctly inserted. Make sure 

that the drain hose on the back of the dryer is fixed correctly, 

either to the dryer’s water tank, or to your domestic sewage 

system.

The dryer should be installed in environment in a room 

temperature range of 20°to 23°C for optimum performance. But 

will function if the  room is between 14 and 30°C. Before you use 

your dryer ensure that it has been in a upright position for at 

least 6 hours.

DAILY USE

Doing this will keep your machine working at its BEST!
Remember to empty your water tank after each drying cycle.

Remember to clean your filters after each drying cycle. (Refer 

to section Care & Maintanence).

1. Open the door and load garments. Always refer to instructions 

on clothing labels and the max loads indicated in the programme 

section. Empty pockets. Make sure  garments do not get caught 

between the door and/or the door filter. 

2. Close the door.

3. Press the button On/Off.

4. Select the programme according to the laundry type.

5. Select the options, if necessary.

6. To start the cycle, press the Start/Pause button. 

7. At the end of the drying cycle, a buzzer will beep. An indicator on 

the control panel signals the end of the cycle. Pull the load out 

immediately to prevent the formation of creases on laundry

8. Turn the machine off by pressing the button On/Off, open the 

door and pull clothing out. If the machine is not switched off 

manually, after about a quarter of an hour from the cycle end, the 

appliance turns off automatically to save energy.

If this last stage is not carried out immediately, some machines 

and/or some programmes/options are equipped with Crease Care 

system. For some hours, after the end of drying,  the drum rotates 

at regular intervals to prevent the formation of creases. In case of 

power failure, it is necessary to press the button Start/Pause to 

restart the cycle.

OPENING OF THE DOOR DURING THE CYCLE

During operation, it is possible to open the door. After having 

closed it, press the button Start/Pause again to restart the dryer. 

*MAX LOAD 7 Kg  

(Dry load)

 CARE LABEL

Always check the care labels, especially when placing garments in 

the tumble dryer for the fi rst time. Below are the most commonly 

used symbols:
   

May be tumble dried.

 

Do not tumble dry.

 

Tumble dry – high heat.

 

Tumble dry – low heat.

CONTROL PANEL  

ON/OFF button (Reset if long pressed)

Programme selection Knob

Start/Pause

Options Buttons*

Dryness Level 

Timed Drying

Start Delay

Rapid

Fresh Care+ (Key lock if long pressed)

Cycle End

*Note: some models may have the wording in full instead of the icons

INDICATORS

Dryness Level:   

Iron Dry - 

 Hanger Dry -   Cupboard Dry -    Extra Dry

Cycle phase:    

Drying -    Cool Down -    End of cycle 

Empty Water tank

 

- Clean Door filter: 

primary,  

secondary  

Autoclean

Refer to Troubleshooting section:  

 Failure: 

 Call after sales service  

DEMO

 Demo Mode  

1

3

2

9

7

8

4

5

6

3“

h

9h
6h
3h
1h

120’

180’

90’
60’

30’

1

3

2

9

7

8

4

5

6

3“

h

9h
6h
3h
1h

120’

180’

90’
60’

30’

Summary of Contents for FT M10 71Y EU

Page 1: ...chine working at its BEST Remember to empty your water tank after each drying cycle Remember to clean your filters after each drying cycle Refer to section Care Maintanence 1 Open the door and load garments Always refer to instructions on clothing labels and the max loads indicated in the programme section Empty pockets Make sure garments do not get caught between the door and or the door filter 2...

Page 2: ... time for drying After having reached the max settable time a further pressure of the button resets the option An indicator on the control panel signals the time being selected h Start Delay This option allows you to set the delay of the cycle start Press the corresponding button several times to obtain the required delay After having reached the max settable time the option is reset by pressing t...

Page 3: ...inserted all filters back in place properly first The filters are essential parts for drying They are intended to collect the lint formed during drying process In case of clogged filters the air flow inside the dryer would be seriously affected the drying times would be longer the energy consumption would increase and the dryer could be damaged If these procedures are not carried out properly the ...

Page 4: ... too wet Carry out a washing cycle with higher spin speed to remove as much water as possible The dryer may be overloaded Refer to the programme section to check the max load for each programme The programme did not end A power failure occurred might have occurred In case of power failure it is necessary to press the button Start Pause to restart the cycle Lights on or flashing Water tank The wate...

Reviews: