background image

Part No. 172020 R0301A

Printed in Canada © 2001 ICON Health & Fitness, Inc.   

Model No. WLEMSY80000
Serial No. 

Serial Number Decal

USER'S MANUAL

ORDERING REPLACEMENT PARTS

If you encounter any problems with this product or if your need to order replacement parts, contact the ICON
Health & Fitness, Ltd. office, or write: 

ICON Health & Fitness, Ltd.
Unit 4
Revie Road Industrial Estate
Revie Road
Leeds
LS118JG

Tel: Country Code: 0345-089009

Fax: 0113-2411120

To help us assist you, please be prepared to give the following information:

•  The MODEL of the product (WLEMSY80000)

• The NAME of the product (WESLO

®

GYM 2000 weight system)

•  The SERIAL NUMBER of the product (see the front cover of this manual)

•  The KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST on page 18 of this manual).

0345-089009

QUESTIONS?

As a manufacturer, we are 
committed to providing 
complete customer satisfaction.
If you have questions, or if 
there are missing parts, we will
guarantee complete satisfaction
through our Customer Service
Department.

Please CALL:

Or WRITE:
ICON Health & Fitness, Ltd.
Unit 4
Revie Road Industrial Estate
Revie Road
Leeds
LS118JG

0345-089009

CAUTION

Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.

Visit our website at

www.weslo.com

new products, prizes,

fitness tips, and much more!

Summary of Contents for gym 2000













Reviews: